|
FOUNDER AND FIRST EDITOR-IN-CHIEF
MICHAEL
S. WALD
(1932-2008)
EDITOR
Ahmad Ibrahim, PhD, PEng
Toronto, Ontario, Canada
E-mail: ijee.editor@gmail.com
ASSOCIATE EDITORS
Thomas R. Kurfess,
Ph.D., P.E. Professor
and BMW Chair of Manufacturing, Dept. of Mech. Engineering; Director, Carroll
A. Campbell Jr. Graduate Engineering Center, International Center for
Automotive Research, Clemson University, Clemson SC 29634-0921, USA. E-mail: kurfess@clemson.edu
C. Kuo, University of Strathclyde,
100 Montrose Street, Glasgow G4 0LZ, Scotland. Tel.: +44 41 5524400 E-mail:
mailto:clhs22@strath.ac.uk
D. McCarthy, Tempus Publications,
Dublin 14, Ireland E-mail: donalmccarthy@eircom.net
J. Turner, Tempus Publications, Dublin 14,
Ireland E-mail: ijee@eircom.net
BOARD OF EDITORS
C. Y. Lam, School of Mechanical and Production Engineering, Nanyang Technological, Singapore 639798. E-mail: mcylam@ntu.edu.sg
R. Natarajan, Chairman, All India Council
for Technical Education, New Delhi, India. E-mail: natarajan@aicte.ernet.in
C. S. Slater, Rowan University, Department of Chemical Engineering,
Glassboro, NJ, USA. E-mail: slater@rowan.edu
EDITORIAL ADVISORY BOARD
Alice Agogino, Mechanical Engineering,
University of California, Berkeley, 94720-1740, USA
Caroline Baillie,Integrated Learning Centre, Queens
University, Kingston, Ontario, Canada K7L 3N6
E-Mail: c.baillie@ilc.queensu.ca
Clive Dym-Fletcher, Jones Chair of
Engineering Design, Harvey-Mudd College, Claremont
CA 91711, USA
E. Eder, Royal Military College
of Canada, Kingston, Ontario, Canada K7K 5LO
E-mail: eder-e@rmc.ca
Nesimi Ertugrul,
Dept.of Electrical and Electronic Engineering,
University of Adelaide,Adelaide 5005, Australia
E-mail: nesimi.ertugrul@adelaide.edu.au
Lawrence Genalo, Department of materials
Science and Engineering, Iowa State University, Ames IA 50011, USA
Denis Gillet, EPFL, Swiss Federal
Institute of Technology, CH-1015 ,Switzerland
E-mail: denis.gilet@epfl.ch
J. Jawitz, Centre for Higher Education
Development, University of Cape Town, South Africa
E-mail: jjawitz@eng.uct.ac.za
Russel C. Jones, Managing Partner,
World Expertise LLC, Falls Church VA, USA
E-mail: rcjonespe@aol.com
Paul King, Department of Biomedical Engineering, Vanderbilt
University, Nashville TN 37253, USA
E-mail: Paul.h.king@vanderbilt.edu
J. F. Marchman, virginia
Polytechnic Institute and State University, Blacksburg VA 24061, USA
E-mail: marchman@vt.edu
Tom Owens, Department of Electrical Engineering &
Electronics, Brunel University, Uxbridge,UK
E-mail: Thomas.owens@brunel.ac.uk
Shirley Pomeranz, Associate Professor,
Department of Mathematical and Computer Sciences, The University of Tulsa,
Tulsa, OK 74104-3189
E-mail: pomeranz@euler.mcs.utulsa.edu
Z. J. Pudlowski, Faculty of Engineering, Monash University, Clayton,
Melbourne, Vic 3168, Australia
E-mail: zjp@eng.monash.edu.au
Nicholas Salamon, Engineering Science &
Mechanics, Penn State University, University Park, PA 16802, USA
E-mail: njsalamon@psu.edu
Sheri Sheppard, Mechanical Engineering, Stanford University, Stanford
CA 94305, USA
E-mail: Sheppard@cdr.stanford.edu
P. Shiue, Christian Brothers University,
Memphis TN 38104, USA
E-mail: pshiue@cbu.edu
I.Verner, Department of Education in
Technology & Science, Israel Institute of Technology, Haifa 32000, Israel
B.Wagner, Center for Didactics of
Technology, University of Hannover, Germany
E-mail: wagner@rts.uni-hannover.de
Levent Yilmaz, Computer Science and Software
Engineering, Auburn University, Auburn AL 36849, USA
Subscription Rates
For complete price information,
please contact ijee@eircom.net
International Journal of Engineering
Education,
C/O John Turner
Dublin Institute of Technology, Bolton St., Dublin 1, Ireland.
Copyright © 2000 TEMPUS Publications
|
Published 6
per annum
|
It is a condition of publication that manuscripts
submitted to this journal have not been published and will not to be
simultaneously submitted or published elsewhere. By submitting a manuscript,
the authors agree that the copy for their article is transferred to the
publisher, if and when the article is accepted for publication. However,
assignment of copying is not required from authors who work for organizations
which do not permit such assignment. The copyright covers the exclusive
rights to reproduce and distribute the article, including reprints,
photographic reproductions, microform or any other reproductions of similar
nature and transactions. No part of this publication may be reproduced,
stored in a retrieval system or transmitted in any form or by any means,
electronic, electrostatic, magnetic tape, mechanical, photocopying, recording
or otherwise, without permission in writing from the copyright holder.
Photocopying Information for Users in the U.S.A.
The Item-free Code for this publication
indicates that authorization to photocopy items for internal or personal use
is granted by the copyright holder for libraries and other users registered
with the Copyright Clearance Center (CCC) Transactional Reporting Service provided by the stated fee for
copying beyond that permitted by Section 107 or 108 of the United States
Copyright Law, is paid. The appropriate remittance of $3.00 per copy per
article is paid directly to the Copyright Clearance Center Inc., 27
Congress Street, Salem, MA 01970.
Permission for Other Use
The copyright owner's consent does not extend
to copying for general distribution, for promotion, for creating new works,
or for resale. Specific written permission must be obtained from the
publisher for such copying.
The Item-fee Code for this publication is: 0949-149X/92
$3.00 + 0.00
|